- Compare suppliers by cost per foot at the same roll width, since a 22 inch sheet holds far more film.
- Longer rolls cost less per foot, so one long roll almost always beats several short sheets.
- Empty film costs the same as printed film, so nest small designs into gaps and right-size your art.
- Get cost per shirt by dividing the roll by usable transfers, then adding blank, labor and packaging.
"How much is a gang sheet?" is the question we hear most from new decorators, and the honest answer is: it depends on the length, the width, and how well you fill it. This guide gives you real 2026 numbers from our own price list, shows how to compare suppliers without getting fooled by sheet names, and walks through turning a roll price into a cost per shirt you can quote from.
All prices below come from our custom DTF gang sheet roll listing at the time of writing. The product page always has the current price.
Arnold Prints gang sheet prices by length (2026)
Our roll is 12.3 inches wide. You choose the length.
| Length | Price | Cost per foot |
|---|---|---|
| 24" (2 ft) | $19.03 | $9.52 |
| 36" (3 ft) | $28.55 | $9.52 |
| 60" (5 ft) | $40.26 | $8.05 |
| 84" (7 ft) | $51.24 | $7.32 |
| 120" (10 ft) | $62.95 | $6.30 |
| 168" (14 ft) | $79.93 | $5.71 |
| 228" (19 ft) | $98.75 | $5.20 |
| 300" (25 ft) | $128.10 | $5.12 |
The takeaway: per-foot cost falls by roughly 45 percent from the shortest sheet to the longest roll. Short sheets are for testing and small jobs. Long rolls are for anyone pressing regularly.
How to compare gang sheet prices between suppliers
Gang sheet prices are hard to compare because widths differ. A "22 x 60" sheet and a "12 x 60" sheet are very different amounts of film. Use these three checks:
- Compare cost per foot at the same roll width. If a supplier uses a different width, compare the price of your typical design sizes instead.
- Check what is included. Is the sheet already ganged and cut, or do you cut it? Is file prep included or extra? Is there a setup fee?
- Add shipping and time. A cheap sheet that takes a week to arrive can cost you a job. Local pickup removes shipping cost entirely. We compared that tradeoff in national DTF suppliers vs local shipping time.
What actually drives your gang sheet cost
Length
The biggest lever. Longer rolls lower cost per foot, so batching orders saves more than any coupon.
How well you fill it
Empty film costs the same as printed film. A half-empty 60-inch sheet can cost more per design than a fully packed 96-inch roll. Nest small designs into gaps around large ones.
Design size
A full-front print uses about a foot of our roll. A left-chest logo uses a fraction of that. Right-sizing art (not printing a left chest at 5 inches when 3.75 looks right) adds up fast.
File prep
Clean, transparent PNGs at 300 DPI cost nothing extra. Files that need backgrounds removed or edges cleaned may need paid prep, so starting with good art saves money.
From roll price to cost per shirt
Here is the simple math decorators use to quote:
- Transfer cost = roll price / number of usable transfers on the roll
- Shirt cost = transfer cost + blank garment + pressing labor + packaging
Example: a 120-inch roll at $62.95 holding 10 full-front designs puts each full-front transfer around $6.30. Fill the same roll with left-chest logos instead and each one drops to under a dollar. That is why mixed layouts, a full front plus a left chest on the same shirt, can be priced so competitively.
For a deeper look at the full garment cost, read how much DTF printing costs per shirt.
Hidden costs to watch for
- Reprints from bad pressing. Uneven pressure over seams is a top cause of peeling. A heat press pillow set costs less than a handful of reprinted shirts.
- Rush fees and overnight shipping. Planning one ordering window per week avoids both.
- Wasted blanks. Always test press a new garment type on a scrap first.
Pressing supplies like pillows, platens, and cover sheets are in our DTF transfers and supplies collection.
Related reading: wholesale DTF gang sheet rolls for decorators and the complete DTF guide for 2026.
Frequently asked questions
What is a fair price per foot for DTF gang sheets?
It depends on width. On our 12.3-inch roll, current prices run from about $9.52 per foot on short sheets down to about $5.12 per foot on a 25-foot roll. Compare suppliers on the price of the designs you actually print.
Is it cheaper to buy one long roll or several short sheets?
One long roll. Per-foot cost drops as length increases, so combining jobs onto one roll is almost always cheaper.
Are there setup fees on gang sheets?
Our listed roll prices are what you pay for the printed roll. Paid file-prep services are optional if your artwork needs cleanup.
Do prices include shipping?
Shipping is calculated at checkout. Local pickup at our Westlake location is available to skip shipping.
Ready to price your own layout? Upload your designs in our DTF gang sheet builder and see the length you need.
Need DTF transfers printed?
Arnold Prints prints full color, hot peel DTF transfers in house in Westlake, Florida, with 1 to 2 day production and no minimum. See our DTF printing services, build and price a sheet in the gang sheet builder, and tick "Cut these out" on any design you want cut apart for $0.35 per piece.
